Help Centre
Step-by-step guides for wiring, fitting and repairing lamps and lighting, from the Lampspares team.
Step-by-step guides for wiring, fitting and repairing lamps and lighting, from the Lampspares team.
Browse by topic
- LampholdersHow to wire, fit and choose the right lampholder.22 guides
- Lamp Kit Installation GuidesStep-by-step instructions for each of our lamp kits.18 guides
- Switches, Dimmers and PlugsWiring inline switches, foot switches, dimmers and plug tops.6 guides
- Flex, Cord Grips and FittingsChoosing and preparing lighting flex, cord grips and candle tubes.6 guides
- Making a LampTurning bottles, jars and other items into lamps, and fixing lampholders in place.12 guides
- Lamp Repairs and TroubleshootingFixing common problems with lamps, switches and lampholders.5 guides
Popular guides
- How to install our push fit E27 and E14 lampholders
This guide is to show you how to install our push fit lampholders in the E27 and E14 ranges.
- How to unlock my ES & SES Lampholder
All ES & SES lampholders have a locking device to stop them coming apart when you take a bulb out.
- GU10 Spotlight Installation Guide
This is a step-by-step guide on how to install the mini GU10 spotlight.
- Cord Grips Explained
Cord grips on a lamp are a very important part of the installation, as they are used to stop any pulling of the flex causing the wires to come out of the lampholder connections. You need to imagine holding the lamp up by the wire and ensuring there is no strain on the connections.
- Anglepoise Lamp Repairs
Anglepoise lamps are very popular for restoring, We get asked on a daily basis for spares for the Anglepoise lamps.
- Wiring a foot switch
Here we will show you how to wire a foot switch, but firstly, let’s help with getting into it. These foot switches have a snap together construction, so sometimes a bit awkward to open for the first time.
Video guides
- How to drill a hole in a glass bottle
How to tighten our bungs Video.
- How to get into our table switches
Below is a quick video showing you how to remove the back of the inline table switch.
- How to tighten our rubber bungs
Watch this quick video on how to tighten our bungs.
Watch all our videos on YouTube
Recently updated
- Kit 8 Installation Guide
This Guide is to help you in installing our Kit 8 for wooden bases.
- Kit 12 Installation Guide
This is to show you a step by step guide on how to install Kit 12.
- Kit 21 Components
Below is a breakdown of all the components included in KIT21. This will give you a clear understanding of the parts that make up the kit, allowing you to assemble your own version if the predefined kit is unavailable.
- Wiring of a 13a plug top
There are a few important things to remember when wiring a plug top. The most important of course is putting the correct wire in the right terminal. This information will be on the card attached to the plug and will also be on the plug itself.
- Wiring our dimmers
This guide is to help you wire our dimmers.
- How to turn a bottle into a light fitting
Looking to turn a bottle into a light fitting?
Can't find what you need? Call us on 01903 776644 or send us a message.