BC | B22 Bayonet Cap Lampholders
Wiring and fitting bayonet cap (BC, B22) lampholders.
- Aligning a BC Unswitched Lampholder
After installing and wiring your lampholder you find it is not working, please check the quick signs of a blown light bulb etc.
- Installing the 40mm BC 4 Part Lampholder
This quick guide here is to help to install our 40mm BC 4 part lampholder.
- Wiring A BC Un-Switched Lampholder
This is a quick guide on how to wire our unswitched BC Lampholder.
- Wiring a Plastic BC Lampholder
This is a quick step-by-step guide on wiring a plastic BC lampholder.
- Wiring An S.Lilley BC Switched Lampholder
S-Lilley which is a UK based manufacturer use an internal earth connection so there is no terminal seen on the outside of the lampholder. The switched S Lilley lampholders provide 3 terminals on the inside in both their standard and safer switched lampholders. There is a thin metal bar that make the contact to the body of the lampholder from the earth terminal.
- Wiring the BC Push Wire Plastic Snap on Cap Lampholder
This guide is showing the unswitched lampholder, the switched lampholder is very similar in design and will work the same way. Before you start you will need to ensure that the tips of your cables are solid, this means either using a dab of solder or using a ferrule to ensure it’s a solid lump and not multi stranded.
All help topics · Can't find what you need? Call us on 01903 776644 or send us a message.