SES | E14 | Small Edison Screw Black Half Threaded Lampholder With Push Wire Terminals 4812753
This lampholder is perfect for smaller project and lighting designed.
Made from Thermoplastic resin it has a max 210°C working temperature rating.
Shade ring included to hold a shade in place.
Has a 10mm threaded entry on the bottom to screw onto a 10mm fixing on a light fitting.
You can also use a cord grip such as part number: PLU67889 to turn this into a pendant light fitting.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.
Installation of the cables onto the lampholder are via push fit connections, you will need to ensure the ends of the cables have a ferrule or a dab of solder.
You cannot install a multi stranded cable into this lampholder, please contact us if you have any questions.
Half threaded means this lampholder has a fixed lip nearer the bottom of the skirt for a shade to rest on then followed by the additional shade ring will hold the shade into position.
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Max diameter: 33mm
Max shade hole size: 31mm
Material: Thermoplastic Resin (Plastic)
Thread Entry: 10mm
Max Cable Diameter: 1.5mm