SES | E14 | Small Edison Screw Lampholder Threaded in White with Flat base fixing Push Wire PLU39507
SES Threaded Lampholder in White.
This SES Threaded Push Wire Lampholder can be used with shade rings to hold the lamp shade in place.
The base or cap on this lampholder has a cord grip built into it and is flat in design allowing for this lampholder to be used in tight lamp bases.
The push wire terminals are designed to have the wire pushed into place. They lock with the use of a spring.
Please note that it is not easy to remove the wires once inserted.
Should be used with solid wires or wire ferrules but can be used with stranded wire by either soldering them or twisting them tightly before insertion.
Lampholder diameter is 35mm across the base and the height is 60mm. 28mm across the thread which takes a normal ses shade ring if required.