SES | E14 | Small Edison Screw Threaded Nickel Lampholder with 10mm Base Fixing PLU29251
This SES Threaded Nickel Lampholder is ideal if the heat from the lamp is a concern.
Use this lampholder with the Brass ses shade rings to hold the lamp shade in place.
It is a metal construction with a high temperature internals.
There is a earth connection on the inside of this SES Threaded Nickel Lampholder and a locking screw on the 10mm thread in the base to stop the lampholder from turning when removing the lamp.
Height 59mm and the diameter is 28mm
Order shade rings separately.
Please Note: As this is a metal lampholder you will need to ensure you use an earth cable.
Entry Thread: M10 x 1mm
Lamp Type: SES | E14 | Small Edison Screw
Max Wattage: 60W
Shade enabled: Yes
Shade Rings Included: No
Finish Material: Metal
Finish: Nickel Plated