The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Lamp Kit 1 with Brass Switched Lampholder For Wooden Lamp Base KIT1B

£9.99 (Inc. VAT)
£8.32 (Ex. VAT)
Lamp Kit 1
From £3.99 - Tracked 48 (See T&C's)
Base Type:
Lamp Kit 1 with Brass Switched Lampholder For Wooden Lamp Base KIT1B
Quantity Discount
25 - 49 £1.00 Off Per Unit
50 - 99 £2.00 Off Per Unit
100 or above £3.00 Off Per Unit

Lamp Kit 1 with Brass Switched Lampholder

Lamp Kit 1 turns a wooden base into a light by screwing a Brass back plate onto the wood. Having a hole in the middle for the flex and a nut cover to cover the screw fixings. This comes with a 3 core flex and a Brass switched lampholder incorporating the safer switched system that turns off the electricity when the lamp is removed.

Use this kit on any Wooden base like a table lamp or standard lamp, just remember to select the longer flex if using it on a taller standard lamp if needed.

The back plate is 25mm in diameter. Fixing screws for the back plate are not supplied.

The cord grip needs to be fitted to stop the flex being pulled out of the lampholder connections. This is normally done under the base.

Make sure you download the Kit 1 instruction by clicking here. This will open the document and you can download it if needed.

Wooden lamp base not included.



  • Tracked 24 - £5.99 Within 1-2 working days (See T&C's)
  • Tracked 48 - £3.99 Within 5-8 working days (See T&C's)