This ES | E27 Lampholder is perfect for replacing a broken one on your light fitting.
Comes with a 10mm Male thread on the bottom so will simply screw onto your existing 10mm diameter thread.
Cannot place a shade onto this lampholder please search for LH1 if you require the same style but to accept a shade.
There are 2 options for this lampholder:-
- 10mm Plastic Thread: This is all plastic this will be used if you only have a 2core cable and there is no provision for an earth cable. This does not have a locking screw so a dab of super glue may be required.
- 10mm Metal Thread: This has a metal thread in the base with a locking screw to lock the lampholder onto your 10mm thread, also has an earth connection and should only be used if you have a 3core cable with earth
Please search for 21502.
This is for the plastic thread only, you cannot use an isolator with the metal thread and there is no need due to an earth being available.
Lamp Type: ES | E27 | Edison Screw
Max Wattage: 60w
Max Temperature: 180°C
Material: Thermoplastic Resin
Thread Size: 10mm