Custom Made Braided Flex With Inline Switch PLU16242

Custom Made Braided Flex with Inline Switch and UK Plug PLU16242.

It uses 3 Core Braided Flex (in over 100 colour options), UK Plug Tops in a selection 3 colour finishes and Inline Switched in 4 colour finishes.

You can select the total length and where you need the inline switch to be added from the options on this page. All measurements for switch position from unwired end are in Millimetres (mm).

Please select from the options above and make sure you check these at the check out page as being a custom lead we are unable to take it back if its the wrong length.

You can select the total flex length from 2 metres to 10 metres and the position of the switch from the un-wired end. 

Please note that you will not be able to order some combinations on the short flex length. Don't forget to order the flex colour and style as well.

We will fit a UK Plug and In Line Switch to all Units unless you contact us.

Flex is 3 core 0.75mm

Please remember this lead set does not have a lamp holder just a prewired inline switch and  UK plug. This lead is not indented to be taken apart in any way.

Important note - Some of the cloth type or rope will not fit up an All-thread tube. In this case you will need to remove the decorative covering at the point it is fitted in the tube.

Returns- please note all custom leads are non returnable. if you have a problem with the lead please contact us.

Don't see what you're looking for from the options above?
Please use the "Contact Us" link at the bottom of the page.