Small ES | E14 Black Threaded Lampholder LH19

Small ES | E14 Black Threaded Lampholder LH19

This lampholder is perfect for smaller project and lighting designed.
Made from phenolic thermosetting resin (Which is similar to Bakelite) it has a max 190°C working temperature rating.
Shade rings included to hold a shade in place.
Has a 10mm threaded entry on the bottom to screw onto a 10mm fixing on a light fitting.
You can also use a cord grip such as part number: PLU67889 to turn this into a pendant light fitting.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.

There are 2 cap options:
Metal Thread - Comes with a locking screw inside the cap this will lock the lampholder onto the thread of the light fitting to prevent any accidental unscrewing. - No earth point
Plastic Thread - Does not come with a locking screw so you may need to use a dab of glue to secure lampholder onto the light fitting. - No earth point.

Threaded Skirt means this lampholder will require 2x shade rings to hold a shade into position if used on a table lamp.

Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm
Diameter: 28mm
Max shade hole size: 31mm
Material: Phenolic Thermosetting Resin (Bakelite)
Thread Entry: 10mm