SES | E14 | Small Edison Screw Half Threaded White ABS Plastic Lampholder PLU60994
This lampholder is perfect for smaller project and lighting designed.
Made from Thermoplastic resin it has a max 190°C working temperature rating.
Shade ring included to hold a shade in place.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.
Has a 10mm threaded entry on the bottom to screw onto a 10mm fixing on a light fitting.
You can also use a cord grip such as part number: PLU61804 to turn this into a pendant light fitting.
Comes with a locking screw inside the cap this will lock the lampholder onto the thread of the light fitting to prevent any accidental unscrewing.
Half threaded means this lampholder has a fixed lip nearer the bottom of the skirt for a shade to rest on then followed by the additional shade ring will hold the shade into position.
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm
Diameter: 28mm
Max diameter: 33mm
Max shade hole size: 31mm
Material: Thermoplastic resin (Plastic)
Thread Entry: 10mm
This lampholder is perfect for smaller project and lighting designed.
Made from Thermoplastic resin it has a max 190°C working temperature rating.
Shade ring included to hold a shade in place.
This lampholder has no provisions for an earth cable so we recommend in using a 2 core cable only.
Has a 10mm threaded entry on the bottom to screw onto a 10mm fixing on a light fitting.
You can also use a cord grip such as part number: PLU61804 to turn this into a pendant light fitting.
Comes with a locking screw inside the cap this will lock the lampholder onto the thread of the light fitting to prevent any accidental unscrewing.
Half threaded means this lampholder has a fixed lip nearer the bottom of the skirt for a shade to rest on then followed by the additional shade ring will hold the shade into position.
Spec:
Lamp Cap: SES | E14 | Small Edison Screw
Max Wattage: 60w
Height: 53.5mm
Diameter: 28mm
Max diameter: 33mm
Max shade hole size: 31mm
Material: Thermoplastic resin (Plastic)
Thread Entry: 10mm
