Rubber Bung 22-24mm with 10mm Allthread
The Rubber Bung 22-24mm with 10mm Allthread is the perfect fixing for holes that vary between 22-24mm and comes with a 10mm thread that will allow you to add a 10mm lampholder or your choice. The bung can be tightened up by using a spanner on the top steel nut until it is snug in the hole, leaving you with the ultimate fixing.
A nut cover can then be used to cover this nut, which are available in all the colours in our range to match your lampholder option (Click Here to View Nut Covers). There is room on the bottom of the bung for a female cord grip to be added but it will spin when the bung is tightened up. The bung is hollow through the centre, and this will allow a cable with the max outside diameter of 6.8mm to fit through, alternatively you can use a side entry cord grip.
If you are unsure on what bung size you require here is a help guide to measure the neck of your bottle to get the correct size: https://support.lampspares.co.uk/hc/en-gb/articles/360012602653-Measuring-Bottle-Hole-For-Bung-Size and also here is a video on how to tighten and fit our Rubber Bungs: https://support.lampspares.co.uk/hc/en-gb/articles/360011861353-Video-How-To-Tighten-up-our-Rubber-Bungs-
Spec:
The Rubber Bung 22-24mm with 10mm Allthread is the perfect fixing for holes that vary between 22-24mm and comes with a 10mm thread that will allow you to add a 10mm lampholder or your choice. The bung can be tightened up by using a spanner on the top steel nut until it is snug in the hole, leaving you with the ultimate fixing.
A nut cover can then be used to cover this nut, which are available in all the colours in our range to match your lampholder option (Click Here to View Nut Covers). There is room on the bottom of the bung for a female cord grip to be added but it will spin when the bung is tightened up. The bung is hollow through the centre, and this will allow a cable with the max outside diameter of 6.8mm to fit through, alternatively you can use a side entry cord grip.
If you are unsure on what bung size you require here is a help guide to measure the neck of your bottle to get the correct size: https://support.lampspares.co.uk/hc/en-gb/articles/360012602653-Measuring-Bottle-Hole-For-Bung-Size and also here is a video on how to tighten and fit our Rubber Bungs: https://support.lampspares.co.uk/hc/en-gb/articles/360011861353-Video-How-To-Tighten-up-our-Rubber-Bungs-
Spec:
- Height: 35mm
- Thread: 10mm
- Inside Diameter: 6.8mm
- Fits a Bottle Size of: 22-24mm
- Finish: Brass