ES | E27 | Edison Screw Threaded Black Lampholder LH3

£1.99
SKU:
PLU10226
Shipping:
From £4.69 - Free over £75
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

Delivery Options


  • Tracked 24 - £6.99 Within 1-2 working days

  • Tracked 48 - £4.69 Within 3-4 working days

  • DHL - £8.99 Within 1-2 working days
ES | E27 | Edison Screw Threaded Black Lampholder

This ES | E27 | Edison Screw Threaded Black Lampholder is the impeccable replacement for a table lamp, or why not simply add a 10mm male cord grip to turn this lampholder into a pendant lampholder.

This lampholder is fully CE certified and has all the relevant documentation such as RoHS certification from the manufacturer.

It comes in 3 parts consisting of the cap which is the section that screws onto the fixing of the light fitting, the centre connection unit where you will connect the live (Brown) and neutral (Blue) then finally the top section which will screw over the connection unit and onto the cap.

There are 2 options for this lampholder:

  • 10mm Plastic Thread: This is all plastic this will be used if you only have a 2core cable and there is no provision for an earth cable. This does not have a locking screw, so a dab of superglue may be required. 
  • 10mm Metal Thread: This has a metal thread in the base with an earth connection and should only be used if you have a 3core cable with earth
The ES | E27 | Edison Screw Threaded Black Lampholder comes with two shade rings, allowing you to easily attach a shade with a hole size of approx. 40mm (standard fitting).

Spec:
  • Lamp Cap Type: ES | E27 | Edison Screw 
  • Cable Connection: Screw Terminal
  • Height: 54mm
  • Diameter: 40mm
  • Diameter Inc Shade Ring: 46mm
  • Thread: 10mm
  • Shade Compatible: Yes
  • Material: Phenolic Thermosetting Resin
  • Max Wattage: 60W
Colour:
Black
Base:
10mm
Switched:
No
Shade Compatible:
Yes
Material:
Plastic
Lamp Type:
ES | E27
Max Wattage:
60W