Black SES Lampholder with Sprung Fixing Clip PLU47208
The Black SES Lampholder with Spring Fixing Clip is used where there is no screw fixing for the lampholder, instead the sprung clip holds the lampholder in place. The hole size for this fixing is 30mm to approx. 80mm
Comes with a UK mains plug and an inline switch with a E14 | Small Edison Screw Lampholder at the end.
Has a cord grip in the base of the lampholder to ensure there is not pull stress on the connections inside the lampholder.
Spec:
Lampholder Type: SES | E14 | Small Edison Screw
Lampholder Style: Black Plastic
Lampholder Height: 56.5mm
Lampholder Diameter: 26.5mm
Cable Length (approx): 2.5m
Cable Cores: 2
Cable CSA: 0.75mm
Switch: Single Pole
The Black SES Lampholder with Spring Fixing Clip is used where there is no screw fixing for the lampholder, instead the sprung clip holds the lampholder in place. The hole size for this fixing is 30mm to approx. 80mm
Comes with a UK mains plug and an inline switch with a E14 | Small Edison Screw Lampholder at the end.
Has a cord grip in the base of the lampholder to ensure there is not pull stress on the connections inside the lampholder.
Spec:
Lampholder Type: SES | E14 | Small Edison Screw
Lampholder Style: Black Plastic
Lampholder Height: 56.5mm
Lampholder Diameter: 26.5mm
Cable Length (approx): 2.5m
Cable Cores: 2
Cable CSA: 0.75mm
Switch: Single Pole
- Colour:
- Black
- Switched:
- Yes
- Cable Cores:
- 2 Core
- Lamp Type:
- SES | E14